SD FLASH 512MB MODULAR MUX

https://www.phoenixcontact.com/us/products/2701872 Multiplexer - SD FLASH 512MB MODULAR MUX - 2701872 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Two of these SD cards, with two ILC 131 ETHs and the individually required input and output terminals, form a multiplexer system that requires no programming. Easy configuration via a small number of wire jumpers. Wireless, Ethernet cable or network connection. Similar figure Product description The basic function of the SD FLASH 512MB MODULAR MUX is aimed at those who wish to utilize the advantages of a flexible multiplexer solution without having to program controllers. To enable this, the required minimum configuration is implemented via a small number of wire jumpers. Standard components (2 x ILC 131 ETH; 2 x SD FLASH 512MB MODULAR MUX) are used for this. The necessary input and output terminals are also used. Communication between the two multiplexer components (ILC 131 ETH) is then established fully automatically via an Ethernet cable or a transparent wireless transmission. The two multiplexers can be integrated into an Ethernet network as an option. The required Ethernet configuration is implemented via the web interface of the ILC 131 ETH. This can be done simply using a PC and a standard browser. The following standard components are required: 2 x ILC 131 ETH (Order No. 2700973) 2 x SD FLASH 512MB MODULAR MUX (Order No. 2701872) To connect the two systems, an Ethernet cable (wired communication) or 1 x FL BT EPA AIR SET (Order No. 2693091) (wireless communication) is required. The specified number of input and output terminals from the Inline Modular range from Phoenix Contact (marked with logo, see below) is also required. All wireless systems that can transmit TCT/IP data transparently can be used to connect the ILC 131 ETH to a multiplexer system. The following Phoenix Contact wireless products are suitable for this: 1 x FL BT EPA AIR SET (Order No. 2693091) 2 x FL WLAN EPA (Order No. 2692791) Plus WLAN Ethernet components in the FL WLAN 24 XX 802-11 series       Key commercial data Packing unit 1 GTIN Custom tariff number 85235199 10/10/2014   Page 1 / 3 https://www.phoenixcontact.com/us/products/2701872 Multiplexer - SD FLASH 512MB MODULAR MUX - 2701872 Technical data Product type Multiplexer Classifications eCl@ss eCl@ss 4.0 27240403 eCl@ss 4.1 27240403 eCl@ss 5.0 27242212 eCl@ss 5.1 27242212 eCl@ss 6.0 19150702 eCl@ss 7.0 19150702 eCl@ss 8.0 19150702 ETIM ETIM 4.0 EC000192 ETIM 5.0 EC000192 UNSPSC UNSPSC 6.01 43172015 UNSPSC 7.0901 43201404 UNSPSC 11 39121311 UNSPSC 12.01 32101601 UNSPSC 13.2 32101601 Accessories Accessories Controller Controller - ILC 131 ETH - 2700973 The controller enables integration of I/O signals from MODBUS periphery devices into the control program via MODBUS/ TCP. Programming takes place with PC Worx Express or PC Worx (IEC 61131-3).     Drawings 10/10/2014   Page 2 / 3 https://www.phoenixcontact.com/us/products/2701872 Multiplexer - SD FLASH 512MB MODULAR MUX - 2701872 Application drawing FL BT EPA FL BT EPA Ethernet Ethernet LOCK IN RT SE SD 2 om .c 56 CA R ta ct on xc ni MATIO N co M D B m nfi em gu oryrati on oe ph w. w w AUTO IL MODULAR MUX SD w w. w AUTO LOCK RT SE IN SD om .c ct ta u oryrati on on 25 C 6 AR M D B ni xc co m nfi em g oe ph MATIO N ILC 170 IL MODULAR MUX SD ILC 170 DO1 DI2 AO3 AI4 DI1 DO2 AI3 AO4 ® The software on the SD FLASH 512MB MODULAR MUX CompactFlash card transforms the ILC 131 ETH and the individual input and output terminals required into a flexible field multiplexer. As a wireless connection or as a point-to-point connection in an Ethernet network. Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 3 / 3